Home Inspection Tip – Five Home Maintenance Areas That Can Snag the Sale of Your Home

The last thing you want when you’re selling your home is to discover problems that could jeopardize the sale. While a home inspection will reveal the condition of your home, you won’t have to be afraid of issues that come up if you’ve kept your home well maintained. With good home maintenance you can avoid some of the most common imperfections and problems found by home inspectors.

Home maintenance tasks are often put off for various reasons, such as lack of time, lack of money, or simply lack of interest. However, when it comes time to sell your home and you know buyers are looking, it’s time to take care of business.

The little things that nag you may be major issues to a prospective home buyer, and they could cost you the sale. You can eliminate the vast majority of problems and stress by checking on five important areas.

1. Dirty filter and coils in the furnace, air conditioning or heat pump system. Having your heating and cooling system serviced by a professional once a year should take care of this problem. You should also clean or replace filters every one to three months, depending on the requirements of your system. This is important for long life of your unit, efficiency, fuel savings, and the assurance you’ll have proper heating and cooling in your home.

2. Poor Caulking of Ceramic Tile in the Tub and Shower Area. It can cost thousands of dollars to repair or replace a rotted shower wall. You can avoid this by caulking tiled areas for a few dollars. If you can see a crack in the calk or grout, you know it’s large enough for water to get in.

3. Ground Fault Circuit Interrupters (GFCI) not Functioning properly. Those electrical outlets with the “Press” and “Test” buttons are GFCI’s. They’re very important in reducing or preventing the chance of electrocution. Push the “Test” button to see if the GFCI’s are working as they should. If not, they’re inexpensive to replace and should only take about fifteen minutes to install. If you have questions or concerns, call a professional electrician.

4. Wood rot. This is a big one, and it can snag the sale of your home. What inspector wouldn’t love to report that a home is free of wood rot and structural damage? Selling your home can be made simpler and more enjoyable if you are knowledgeable about preventative maintenance. For example, have a good moisture barrier under the crawl space. Keep an eye out for leaks around windows, doors and the roof.

5. Amateur Workmanship. Did you weekend handyman brother-in-law help you remodel the kitchen last year? When amateurs do home projects, often the materials used aren’t right for the intended purpose, or they’re of poor quality, or both. Inspections are seldom performed or permits obtained when such projects are done by amateurs. Unfortunately amateur work can complicate a closing.

Be sure to keep your home in good shape to make things go smoothly for your home inspector and for the selling process as a whole. You’ll be glad you did.

Home Inspection Tip – Move Your Clutter!

When any self respecting housewife invites company for dinner, she cleans the house to impress her guests. If you’re selling your home and are having it inspected, as you should, you’ll need to do some house cleaning, too. That’s not so you can impress your home inspector, but so he can do his job.

Many times home inspectors can’t fully do what they’re supposed to do because certain areas of the home are inaccessible, due to clutter. When it’s time for your home inspection, you want to get your money’s worth. You don’t want the report to say, “Inspection limited due to the excess possessions blocking access and view.”

This isn’t about being a neat freak. The American Society of Home Inspectors ASHI┬«, Standards of Professional Practice, says inspectors are not to report on components or systems which are not observed. Your inspector isn’t required to disturb insulation or move personal items out of the way. If you’ve got furniture or plants in places your inspector needs to see, like the doorway to a utility closet, you’ll have to move that stuff. Clear off any snow and ice if necessary as well.

What if the water heater, electrical panels, or attic are places your home inspector can’t get to? Those are areas he must check if your home is to be inspected properly, and if you’re going to get the report you need. The bottom line: Don’t let junk ruin your home inspection.

In some homes water heaters are found in utility closets or garages. If the water heater is surrounded by clutter, your inspector can’t tell if there are possible problems, such as a fire hazard. If an electrical panel has been improperly installed, but is hidden from view, your inspector won’t know that, and neither will you. What if that panel causes a fire for the next home owner?

Walk through your home before your home inspection is to take place and make sure all doors and passageways are accessible. Move stored items out of the way or elsewhere altogether. If the home being sold is vacant make sure that the power, water and gas remain on so that all systems are operable and can be inspected. If items on the report can’t be inspected, you as the seller may be asked to have the home inspected again after areas in question have been cleared out. Similarly, if you’re the buyer, you can ask for another inspection. Another option is to request that the seller pay for a warranty if a certain component is not inspected.

Granted, if a home to be inspected is being lived in, there will be personal possessions throughout the house. Some areas will be less accessible as a result. If you’re the seller, make sure things can be moved out of your inspector’s way.

Show some common courtesy and make sure key areas around your property can be seen by your home inspector. You may not be trying to impress him at a dinner party, but you’ll make his job easier, and you’ll get a more complete report. That, after all, is what you’re paying for.

Older Home Inspection Tips – Replace Your Knob and Tube Wiring

One area of significant concern with older home inspection is the wiring. During the period between 1930 and 1950, when household demands for electricity were much lower, most home wiring included a type of wiring called knob and tube. Today’s homes use much more current to run all of the newer appliances families require to live a comfortable lifestyle. In older homes with this type of wiring fires are much more of a risk.

A simple trip to the basement of your house can reveal if you have this type of current system. If you see white knobs attached to the joists with wires running through them, chances are this is knob and tube wiring. The knobs acted as insulators from objects while the ceramic tubing provided the support for wires as they travel through floor joists.

Older home inspection today requires catching this type of wiring system with recommendations of complete replacement in order to avoid costly or life threatening fires. This includes replacement of not only the fuses but the wires as well. Simply put, If you upgrade the panel, then replace the wiring as well.

An important side note is that a lot of insurance companies will not write or renew policies where there is existing knob and tube wiring. Nothing can be more frustrating than finding out your proud real estate purchase will not be covered prior to closing.

Rather than hoping your house passes inspection, make sure your professional older home inspection includes the wiring system and recommendations for replacement before it causes undue headache.